Mold in the air ducts can be an easy DIY fix. First, turn OFF your HVAC system. Find an approved cleaning solution. Pour or spray the solution on the infected area. Put on protective gear and a mask - you do not want to make contact with the mold (or chemicals! or breathe it in. Scrub the area using disposable towels or brushes, and be sure to check the drip pan and evaporator coils. Vacuum the affected areas after cleaning. Bag all your rags and utensils and dispose of properly. Apply an inhibitor to the affected areas to prevent future growth. It is recommended to call a professional if you have more than 10 square feet of mold as this may be too big of a job, or there might be other/larger issues. Even if you don’t have more than 10 square feet of mold, you can still call a professional to clean it up.


On the other hand there are many more air duct cleaning companies that will properly clean the air system and air ducts and use commercial negative air duct cleaning vacuums with at least 2,000 CFMs of vacuum power and utilize proper agitating tools to move the contaminates within the duct work to be captured with HEPA filters and contained by the air duct cleaning vacuum equipment.
The best way to know if your cleaning was effective is through improved performance of your HVAC system, ideally. You can have before-and-after pictures taken of the ducts (make sure they are of the intake ducts - the ducts that return air into your room), motor and coils. Another tip is smell – sniff the ducts before and after the work is done. Outside of noticeably improved performance, smell and visual evidence are your best indicators.
Terrible! He came out and I thought he was very professional and talked a good game plan. He ordered a new CLOPAY door almond with windows for us on June 22, 2018. He sent two men out to install it a week later. They were here 5 hours and when it was done it had no windows. We had to let them install the top without windows in order to open and close garage. They said they would be here in morning and didn't come until late afternoon. Never put the garage door opener on so we were opening and closing manually for a couple of days. Then owner Robert Gaffney who we had been working with all along came out at 9:30 p.m and hooked up opener for us. He told us he had ordered the door top with windows from distributor but then every week had another excuse as to why it didn't come. After 1 and 1/2 months we called distributor direct. He said he never had ordered the door. We told Robert not to come back. The distributor who knew we had already paid Robert $1100.00 said he would pay for the door and installer for us. He then contacted Associated Doors Inc. who came right out and ordered everything including trim which Robert had removed from around the door. Had to wait another 2 weeks for it to come in but then Denny with Associated Doors Inc. came back and did a beautiful and professional job.
From our salesmen Scott to our installers Eric, Johnny and Tim, we couldn't have asked for a more professional, knowledgeable team to do our AC replacement. From the beginning, Scott the made the whole experience easy with his knowledge and understanding of our needs and concerns. I would definitely recommend Waychoff's, Scott and our installers to anyone that is in need of either a service, maintenance or like us, a replacement of a aging and failing ac system in their home. Couldn't be more pleased with the whole experience and quality of equipment. Do yourself a favor, don't call anyone else but Waychoff's for and AC service needs.
Once we have cleaned your entire air duct system, our job is not finished.  All of your vent covers are washed, and before they are replaced we sanitize your system with EnviroCON antimicrobial fogger.  This EPA registered disinfectant is commonly used in hospitals and nursing homes, and works to eliminate mildew and mold in your air ducts.  And, lastly, everything in your home is left exactly as we found it, with no mess left behind!
Once we have cleaned your entire air duct system, our job is not finished.  All of your vent covers are washed, and before they are replaced we sanitize your system with EnviroCON antimicrobial fogger.  This EPA registered disinfectant is commonly used in hospitals and nursing homes, and works to eliminate mildew and mold in your air ducts.  And, lastly, everything in your home is left exactly as we found it, with no mess left behind!

A comprehensive duct cleaning takes between 3-5 hours, depending upon the size of your house (and much longer for commercial applications). Most companies, especially the ones that have a price that seems to be “to good to be true”, are in and out of your house in less than an hour and may try to upsell you based on “mold” they allegedly find in your air handler.
Mold in the air ducts can be an easy DIY fix. First, turn OFF your HVAC system. Find an approved cleaning solution. Pour or spray the solution on the infected area. Put on protective gear and a mask - you do not want to make contact with the mold (or chemicals! or breathe it in. Scrub the area using disposable towels or brushes, and be sure to check the drip pan and evaporator coils. Vacuum the affected areas after cleaning. Bag all your rags and utensils and dispose of properly. Apply an inhibitor to the affected areas to prevent future growth. It is recommended to call a professional if you have more than 10 square feet of mold as this may be too big of a job, or there might be other/larger issues. Even if you don’t have more than 10 square feet of mold, you can still call a professional to clean it up.
Business Description: Stanley Steemer has been providing cleaning and restoration services for both residential and business customers for more than 60 years. They offer multiple services, including carpet cleaning, tile and grout cleaning, hardwood floor cleaning, upholstery cleaning, air duct cleaning and water damage restoration services. For more information, visit www.stanleysteemer.com.
My heat pump unit was not working, though the handler and thermostat were fine. I did a little testing myself and determined that the low pressure switch was triggered, then called Waychoff's without having told them anything about what I did (sort of a test to see if they'd try to sell me something I didn't need). Eric showed up 30 minutes early to the appointment (a pleasant surprise), and immediately got to work. Within 10 minutes he told me I had no coolant which triggered the low pressure sensor which meant there was a leak. He inspected the handler inside and then told me he needed to do a nitrogen pressure test to find the leak. 10 minutes after that he showed me the hissing leak in the heat pump, proving that there was in fact a leak. He brazed/welded it shut, re-tested to confirm, then filled the unit with coolant. 60 minutes later I'm back in business and my heat pump is working great. I liked that Eric was 100% honest about the issue and how to fix, and didn't try to sell me anything I didn't need. He also worked with me on the coolant charges, since they tend to mark it up quite a bit. Overall a good experience - I'd use them again for sure. They're a little bit pricey, but for the quality, honesty, and knowledge it's worth paying.
Nowadays most homes have a central air system with connecting air ducting to move conditioned indoor air throughout the home. Over time, the air system and the connecting air ducting will accumulate dust and other contaminates, which can cause circulation of dirty and polluted indoor air through your home. Out-of-sight and out-of-mind health items that we don’t think much about are dirty air system and air ducts which could be the unhealthiest item in our home.
We use Rotobrush aiR+ professional air duct cleaning equipment (rotary brush and vacuum) and believe very strongly that this is the best equipment to clean the air ducts in your home.  Our equipment features a camera system so that if you would like, you can see what we are doing as we are doing it.  The Rotobrush aiR+ is designed specifically to handle the soft, flexible ducts in homes in the South. We are able to clean air ducts by inserting the rotating brush into the duct. With the brush rotating at 450 rpm, it loosens any debris that may be stuck inside. While the brush is scrubbing the walls, the vacuum sucks up the debris, leaving your air ducts clean.
×