Terrible! He came out and I thought he was very professional and talked a good game plan. He ordered a new CLOPAY door almond with windows for us on June 22, 2018. He sent two men out to install it a week later. They were here 5 hours and when it was done it had no windows. We had to let them install the top without windows in order to open and close garage. They said they would be here in morning and didn't come until late afternoon. Never put the garage door opener on so we were opening and closing manually for a couple of days. Then owner Robert Gaffney who we had been working with all along came out at 9:30 p.m and hooked up opener for us. He told us he had ordered the door top with windows from distributor but then every week had another excuse as to why it didn't come. After 1 and 1/2 months we called distributor direct. He said he never had ordered the door. We told Robert not to come back. The distributor who knew we had already paid Robert $1100.00 said he would pay for the door and installer for us. He then contacted Associated Doors Inc. who came right out and ordered everything including trim which Robert had removed from around the door. Had to wait another 2 weeks for it to come in but then Denny with Associated Doors Inc. came back and did a beautiful and professional job.
A round, flexible exhaust tube at the back of your dryer connects to the wall and sends hot, moist air outdoors. As your heated clothes tumble in the hot air, lint (tiny bits of the cotton or other fibers that make up your clothing) come off the fabric. Most of these fibers end up in the lint trap as the exhaust air passes through it. You can usually access the lint trap inside the dryer door or on top of the dryer.
Mold in the air ducts can be an easy DIY fix. First, turn OFF your HVAC system. Find an approved cleaning solution. Pour or spray the solution on the infected area. Put on protective gear and a mask - you do not want to make contact with the mold (or chemicals! or breathe it in. Scrub the area using disposable towels or brushes, and be sure to check the drip pan and evaporator coils. Vacuum the affected areas after cleaning. Bag all your rags and utensils and dispose of properly. Apply an inhibitor to the affected areas to prevent future growth. It is recommended to call a professional if you have more than 10 square feet of mold as this may be too big of a job, or there might be other/larger issues. Even if you don’t have more than 10 square feet of mold, you can still call a professional to clean it up.
"So My A.C. suddenly went belly up and I needed a total brand new unit inside and out. So a little background on myself. I'm an engineer, so I know a little bit about A.C. and how they work. I'm by no means an expert, but it does allow me to detect if the A.C. guy knows his stuff, especially if they don't know what I do. 😉 And I'm happy to say, these guys do. One of the things that helped me chose them is that they brought up the importance of controlling humidity. None of the other contractors I spoke to, mentioned that. I also appreciate the fact that he didn't try to "up sell" me and get me to buy things I didn't need. He was on time, honest and forth coming about what I needed and what I didn't. When the workers came, they were on time, very professional and very CLEAN. After they left, I couldn't tell they had been there. Highly recommended this service."